450W Induction Motor Direct drive 6" disc and 4"x36" belt combination sander

Model #: BD4603

Both CE & CSA approved 6" disc and 4"x36" belt sander with separated dust port for both belt and disc sanding. Both the belt & disc functions are powered directly from the motor shaft. The sanding belt can be used in horizontal or vertical mode. It can also be locked at any angle in between, sometimes more comfortable for sharpening tools.

The ALLWIN BD4603 belt disc sander easily sands, smooths and removes all of the jagged edges and splinters on your wood and lumber. Because this is a ALLWIN product, your purchase comes backed by a one-year warranty and a helpful customer service line all to make sure that you remember ALLWIN brand. 

We recommend wearing a face mask or respirator during all sanding operations, even if a dust extraction system is in place. 

Feature：

1. 450W Induction Motor directly drive, maintenance-free.

2. 25% plus extra sanding efficiency comparing to normal design.

3. Quick sanding belt replacement and easy sanding track control mechanical design.

4. Work table can be used both on sanding belt and disc.

5. Individual dust port for both belt and disc sanding.

Details:

1. Sanding belt and disc were directly driven by a powerful 450W motor, provides power for small and large sanding operations on various materials.

2. 4” * 36” Sanding belt tilts up to 90 degrees vertically, unsupported underside allows for sanding of curved work pieces.

3. No drive belt , no gears, maintenance-free. 

4. 6” Side disc tiltable from 45°~ 90 °work with miter gauge supply detailed sanding. 

5. When the time comes to replace the sanding belt there is a quick release tension lever and tracking adjustment to balance the new belt.

LOGISTICAL DATA

Net / Gross weight: 13.3 / 15 kg 

Packaging dimension: 565 x 500 x 250 mm 

20” Container load: 390 pcs 

40” Container load: 820 pcs 

40” HQ Container load: 920 pcs