33”radial arm bench drill press @ 3/4hp & 5- speed for workshop

Model #: DP16R

33”radial arm bench drill press @ 3/4hp & 5- speed for workshop

Feature：

The ALLWIN 33-inch radial arm 5-speed Benchtop drill press powers through larger metal, wood and plastic with swing up to 420mm. The powerful induction motor features ball bearings for an extended life and balanced performance. It can create holes in thinner work pieces and mount to work surfaces to save floor space. They are more compact with a shorter spindle travel than floor-stand drill presses. Their manual down-feed requires hand-cranking to lower the drill bit into work pieces.

Remember when you could drill at adjustable speed? Remember ALLWIN .

1.Powerful 3/4hp induction motor accept Max 5/8” drilling capacity

2.Radial drill press features variable swing up to 33”(838mm) and pivoting heads for drilling at just about any angle.

3.Cast iron work table & base with extension support. 

4.5 speed (500 ~ 2920RPM @ 60Hz) for different application 

Details:

1. Adjustable work table

Adjustable the work table 45°left and right for precisely angled holes.

2. Drilling depth adjustment system

Allow you drill hole at any exact deep by setting the two nuts which can limit the movement of spindle.

3. Cast iron base with extension support. 

Ensure machine is steady when working

4. Five different speeds are available

Change five different speed ranges by adjusting the belt and pulley.

LOGISTICAL DATA

Net / Gross weight: 39.5 / 42.5kg 

Packaging dimension: 960 x 500 x 335 mm 

20” Container load: 168 pcs 

40” Container load: 337 pcs 

40” HQ Container load: 406 pcs